blungers pugmills slabroller electric mixer | |
Walker Slab Roller (Dual Roller Drive)
Product Codes
600mm
(MA60) & 900mm (MA70)
Designed & Manufactured by Walker Ceramics in Australia.
These dual roller drive slab machines have two driven rubber
covered rollers which give consistency of compression on both sides of the clay,
ensuring accuracy of thickness throughout the slab.
Adjustment in thickness is variable from 5mm to 30mm and is
instantly made from a single crank located on the top of the machine. This crank
raises or lowers both sides of the upper roller simultaneously.
The rollers do not move along the table, they remain
stationary and bulk clay passes through the rollers whilst between two sheets of
canvas.
The sheets of canvas, being not attached to the machine, can
be cleaned and washed very easily.
Two 1500mm lengths of canvas are supplied with the machine.
The drop side table design reduces the dimensions to the
roller width and length of 1200mm and a table height of 950mm. Industrial
castors make it very mobile for easy and small area storage. The slab roller
weighs approximately 100 kgs.
The dual roller drives are operated through a series of gears,
turned by a hand wheel of sufficient size to easily rotate. They are capable of
rolling a slab any length by backing the machine up to a work table. The drop
side tables on either side of the rollers allow the making of a 1400mm slab. If
the drop side tables are down a 600mm slab can be made in a much reduced working
space. A great advantage in a limited studio or classroom space.
The tables, when raised, make an ideal additional work bench.
The process is ideal for potters or schools requiring a wide
thickness range of slabs or for performing sophisticated inlay work.
The table tops are in stainless steel at no extra cost.
|
MA60 |
Slabroller - 600mm (24")
Slabs |
|
MA65 |
Slabroller Spare Canvas 600mm x 2 |
|
MA70 |
Slabroller - 900mm (36")
Slabs |
|
MA75 |
Slabroller Spare Canvas 900mm x 2 |

|