Home                      

Chapters

Index

Contact

Clays

Feeneys

Schools page

Data Sheets

Slips

Casting Powders

Slip Recipes

Glazes

Colours

Colour Charts

Pricelists

Handbook

Equipment

What's New

Tools  

Brushes

General

Raw Materials

Faults & Remedies

Specials

Order Form

History

Refractories

Kilns

Glossary

Tools

Tools Index    Tools Page 1    Tools Page 2    Tools Page 3    

Looped Round Wire:
Three double ended tools with ground steel ends firmly wire wound to their wooden handles. Available individually or as a set.

Sculptor's Thumb (JU6755):  
Turned, polished wooden thumb, that duplicates thumb and finger without abrasive wear to the sculptor's hands. Approximately 13cm long.

Magic Mister JU8000                   

A manual airbrush blown by the mouth quite safely!!! Use for glazes or colours.....

Mould Trimmer (JP6770):
Plastic tool for trimming excess slip away from a mould. Used in preference to metal tools to safeguard against damaging moulds.

Needles:  
The steel needle is a necessity for all potters and is used to cut through and remove uneven top edge of thrown ware. Available in Fine, Medium or Heavy Duty gauge.

Palettes - Rubber:

A variety of palettes for every day use in the pottery workshop. Soft (flexible) rubber palettes are used most often in the pressed dish technique when clay is pressed into a mould.  The hard (firm)  rubber type may be used on thrown or hand built ware for shaping and smoothing the surface. 

JN6851 Small (Firm) 76 mm long

JN6854 Medium (Firm) 108 mm long

JN6861 Small (Flexible) 76 mm long

JN6864 Medium (Flexible) 108 mm long

JN6868 Small flexible Orange - ideal for decals and burnishing

Palettes - Stainless Steel

Serrated and Plain palettes are made from high quality stainless steel and are suitable for smoothing and trimming leather hard or dry clay.  Approx. 75 mm x 40 mm

Ribs - Boxwood: 
May be used to pull up the pot, however their different styles lend themselves to achieving many different shapes and designs.

Rolling Pin (JU7101): 
For rolling out clay slabs. All wood, 535mm (21 inches) long with a 75mm (3 inch) barrel.

Slip Trailers:
Soft rubber bulb with plastic nozzle. Use for trailing any liquid product - Slip. Glaze, Underglaze etc. Raised designs can be achieved by mixing colour or slip with Plyrite Binder.

Tile Cutters

Easy to use, Australian made, spring action cutters that make tile cutting a snap.  Create consistent accurately sized tiles using these tools.

Crafted from galvanized steel, they come in a variety of shapes and sizes:  square, round and border.

50 x 50mm Square  (HT5)

76 x 76mm Square (HT10)

 100 x 100 mm Square (HT15)

127 x 127mm Square (HT20)

150 x 150 mm Square (HT25)

76mm Round (HT30)

100 mm Round (HT35)

100 x 50mm Border Tile (HT40)

Tools Index    Tools Page 1    Tools Page 2    Tools Page 3   

Home      Chapter Index        Full Product Index           Contact        Order